Page 1 of 1
Windscreen Wiper arms
Posted: Wed Jan 24, 2024 3:39 pm
by Mike Pim-Keirle
Can anyone please tell me what the width of the wiper arms should be on a UK 1965 MGB Roadster? The ones on my car are 7.2 mm, which is making it difficult to find wiper blades that fit. I recently bought a pair from eBay, advertised as suitable for 7mm arms, but in fact the slot where the wiper arm should fit is only 6.4mm. Previously I have always replaced only the rubber insert, but no-one seems to offer these any more, just the complete blade including stainless steel backing. Tanks in anticipation.
Re: Windscreen Wiper arms
Posted: Wed Jan 24, 2024 5:12 pm
by Allan T
For years I just changed the rubber wiper blades every summer, endured a smeared near-opaque windscreen whenever it rained, and assumed the MGB wiper system wasn't up to the job. Then for reasons I can't remember I changed the complete wiper fittings. What a difference! Try one of the specialist suppliers instead of eBay. You could start here:
https://www.moss-europe.co.uk/shop-by-m ... 67-80.html
Re: Windscreen Wiper arms
Posted: Thu Jan 25, 2024 7:33 pm
by Michael Barclay
Re: Windscreen Wiper arms
Posted: Fri Jan 26, 2024 11:47 am
by Not_Anumber
How did you go about ordering from that seller Mike ? At first sight their manufacturer list doesnt include MG or Rover
Re: Windscreen Wiper arms
Posted: Sat Jan 27, 2024 4:47 pm
by Michael Barclay
Once on the site Clicked "rubber for windscreen wiper blades". It gives you the profile sizes so you can check if these will fit your existing blades.
Hope this helps.
Mike