Plastic front wing liner shields

Technical MGB discussion
Post Reply
User avatar
Bumpa
Posts: 233
Joined: Sun Dec 13, 2020 9:58 am
Forename: Mike
Surname: Howlett
MGCC Member: Yes

Plastic front wing liner shields

Post by Bumpa »

Way back in about 2007 when I was building my V8 GT conversion, I fitted a pair of plastic front wing liners like these https://mgbhive.co.uk/product/gac7038-p ... g-liners/
Today after about 17 years I took one off to have a look. The car has been used since 2009 in all weathers, has mostly lived outdoors, and has driven around 36,000 miles. As the photos show there is no sign of any deterioration round the headlight, or on the "trumpet" section, or anywhere! They will go right back in.
Rear of RH wing.jpg
Front of RH wing.jpg
Mike
1969 MGB GTV8 3.9 Conversion. Many classics have passed through my hands but the faithful BGT V8 is the last man standing.
Ian F
Posts: 911
Joined: Fri Mar 27, 2015 8:18 am
Forename: Ian
Surname: F
MGCC Member: Yes

Re: Plastic front wing liner shields

Post by Ian F »

I think the heat from that exhaust must also have been very beneficial!

Ian F
MGCC member
1972 BGT, Blaze, Navy trim, recessed grill
1961 Midget, 948cc, Clipper Blue, Blue trim and weather gear
Post Reply