Search found 230 matches
- Fri May 03, 2024 12:37 pm
- Forum: MGB Technical
- Topic: DIY power steering write up ?
- Replies: 18
- Views: 1011
Re: DIY power steering write up ?
If you can PM me your email address Lindsay I can send photos of how the EPAS column is shortened and an example of how to make up the intermediate shaft and bearing.
- Tue Apr 30, 2024 6:40 pm
- Forum: MGB Technical
- Topic: DIY power steering write up ?
- Replies: 18
- Views: 1011
Re: DIY power steering write up ?
Thanks Lindsay I dont have an oscilloscope sadly to check whether the Lite Steer GPS device's square wave output for the road speed is pull-up or pull-down. It may be worth advising Lite Steer you have a specific requirement, are aware they supply a device for the MGF but need them to confirm the ou...
- Tue Apr 30, 2024 11:54 am
- Forum: MGB Technical
- Topic: DIY power steering write up ?
- Replies: 18
- Views: 1011
Re: DIY power steering write up ?
The GPS unit I bought to generate the road speed signal came from a company called Lite Steer. I found it on Ebay rather than their own website which is focused more on complete steering systems rather than controllers. Its case and connectors look extremely similar to examples on the Bridgwater Ele...
- Mon Apr 29, 2024 5:15 pm
- Forum: Parts For Sale/Wanted
- Topic: Original MGB RUBBER MATS wanted
- Replies: 2
- Views: 61
Re: Original MGB RUBBER MATS wanted
were any original rubber mats made in yellow ochre ?
- Mon Apr 29, 2024 3:11 pm
- Forum: MGB Technical
- Topic: DIY power steering write up ?
- Replies: 18
- Views: 1011
Re: DIY power steering write up ?
Thanks Lindsay. It would be interesting to see the EPAS motor joined into a B column so that you could keep the original steering wheel and stalks. In my case I decided this was beyond my engineering skills when i realised the turn sensor would also need to be transplanted. To make mine less obvious...
- Sat Apr 27, 2024 8:58 pm
- Forum: MGB Technical
- Topic: DIY power steering write up ?
- Replies: 18
- Views: 1011
Re: DIY power steering write up ?
Thanks Paul. I hope to have the next part around mounting the EPAS column available soon. Its been taking a bit longer than expected as Ive had to remake the main mounting bracket a few times in order to get the correct clearance and orientation. At least when it's done there will be enough informat...
- Fri Apr 26, 2024 6:16 pm
- Forum: MGB General
- Topic: Respray costs
- Replies: 9
- Views: 468
Re: Respray costs
How much were you then expecting to put her up for sale for Geoff with the new paint ?
- Mon Apr 08, 2024 11:28 am
- Forum: MGB Technical
- Topic: Alternative calipers
- Replies: 2
- Views: 343
Re: Alternative calipers
I guess that may be best solved by locating the specs of the XJ calipers or going onto an XJ forum to ask someone to take a micrometer to the holes. It would be interesting if this was an upgrade path
- Wed Apr 03, 2024 6:28 pm
- Forum: MGB Technical
- Topic: Rebuilt Engine Burning Oil
- Replies: 13
- Views: 824
Re: Rebuilt Engine Burning Oil
+1 for valve stem seals. Have they checked/ changed these ?
- Wed Apr 03, 2024 2:20 pm
- Forum: MGB General
- Topic: Prospective Ownership - Sense Check Questions
- Replies: 17
- Views: 150311
Re: Prospective Ownership - Sense Check Questions
If you are driving East into Essex at any point you can drop in to see work in progress on my B GT too