Hoping someone can help...
Do you know where I could source spare screws for the folding frame as indicated below?
I have two missing ones so finally understand where the annoying rattle was coming from!
Folding Hood Frame Screws
-
Ruabon Red
- Posts: 39
- Joined: Fri Mar 08, 2019 5:30 pm
- Forename: David
- Surname: Hughes
- Location: Wrexham
Folding Hood Frame Screws
Hi all,
Hoping someone can help...
Do you know where I could source spare screws for the folding frame as indicated below?
I have two missing ones so finally understand where the annoying rattle was coming from!
Many thanks in anticipation
Hoping someone can help...
Do you know where I could source spare screws for the folding frame as indicated below?
I have two missing ones so finally understand where the annoying rattle was coming from!
Many thanks in anticipation
-
Charles Farran
- Posts: 467
- Joined: Fri Oct 31, 2014 11:08 am
- Forename: Charles
- Surname: Farran
- MGCC Member: Yes
- MGOC Member: Yes
- Location: Warwickshire
Re: Folding Hood Frame Screws
Hi,
Might be worth speaking to MGB Hive as i see they have various screws under their fixings section. I don't recall seeing them listed as separate items elsewhere. If you can remove one of the remaining ones , that would enable you to determine head profile, length, diameter , thread (UNF or UNC etc.). Most threads on the MGB are UNF although there are some notable exceptions.
No doubt breakers such as "Welsh MG" could probably assist.
Cheers,
Charles
Might be worth speaking to MGB Hive as i see they have various screws under their fixings section. I don't recall seeing them listed as separate items elsewhere. If you can remove one of the remaining ones , that would enable you to determine head profile, length, diameter , thread (UNF or UNC etc.). Most threads on the MGB are UNF although there are some notable exceptions.
No doubt breakers such as "Welsh MG" could probably assist.
Cheers,
Charles
1980 Roadster
Re: Folding Hood Frame Screws
I've got an old frame from a 1980 car that I don't need. Not sure if it has the same screws but I can have a look.