Hello, my car is a 67 so did not have this lamp from new. I have purchased the complete lamp, and would like some advice on how to wire it in please.
I presume the later offside 'C' pillar wires, which on later models powered it, aren't there, so I shall be using new wire and finding an existing power feed. Looking at the switch, does it just require power to the r/h side, as viewed from the rear, with the earth being completed by the screw to the body through the copper connecting plate on the far l/h side of the bulb holder, or is an earth wire required to the other direct side of the bulb holder as well ? The unit came from Moss, but I presume they're all the same.
Many thanks.
GT tailgate lamp
-
- Posts: 12
- Joined: Tue Jan 14, 2020 7:37 pm
- Forename: Andrew
- Surname: Stacey
- MGCC Member: Yes
- Tom Brearley
- Posts: 120
- Joined: Sun Apr 01, 2018 6:54 pm
- Forename: Tom
- Surname: Brearley
- MGCC Member: Yes
- Location: Devon
Re: GT tailgate lamp
Here's a picture of mine.
It appears to earth through either the attaching screws or the tailgate switch. There's no separate earth wire.
It appears to earth through either the attaching screws or the tailgate switch. There's no separate earth wire.
1973 MGB GT
Mallard Green / Autumn Leaf
Mallard Green / Autumn Leaf
- Tom Brearley
- Posts: 120
- Joined: Sun Apr 01, 2018 6:54 pm
- Forename: Tom
- Surname: Brearley
- MGCC Member: Yes
- Location: Devon
Re: GT tailgate lamp
In fact, looking at the picture it seems that in the position shown it earths through the PW wire which connects to the tailgate switch (i.e. it only comes on when the tailgate is open and an earth path is offered). But with the little switch in the other position it earths through the fixing screw via the copper track shown (i.e. the light is always on).
1973 MGB GT
Mallard Green / Autumn Leaf
Mallard Green / Autumn Leaf
- Tom Brearley
- Posts: 120
- Joined: Sun Apr 01, 2018 6:54 pm
- Forename: Tom
- Surname: Brearley
- MGCC Member: Yes
- Location: Devon
-
- Posts: 12
- Joined: Tue Jan 14, 2020 7:37 pm
- Forename: Andrew
- Surname: Stacey
- MGCC Member: Yes
Re: GT tailgate lamp
Thanks Tom. I would think, as you say, that mine will only need the one pair of wires, and earth through the attachment screw to the body, as it never had the door switch. I'm always wary of entering into the unknown world of car electrics as it's so easy to blow things up !!
All the best
Andrew.
All the best
Andrew.